Uncoated Or Coated Carbide Tips For Retipping Greenteeth 900 Series Tungsten Carbide Inserts
|Place of Origin||SICHUAN|
|Model Number||ST-17016\ST-16004 or Customized|
|Minimum Order Quantity||No limit, but a favorable discount can be granted for a large volume|
|Packaging Details||Plastic boxes inside and cartons outside|
|Delivery Time||15-25 working days|
|Payment Terms||L/C, T/T, Western Union|
|Supply Ability||2 miliion one month|
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Surface Finish||As Sintered/sandblasting/uncoated Or Coated||SantonGrade||YT15/YT14/YG8/YG6X/YG6/YW1/YW2|
|Model Number||ST-17016 Or Custom||Hardness||89.5~93.2 HRA|
Retipping Greenteeth Coated Carbide Tips,
Uncoated Tungsten Carbide Tips,
900 Series Tungsten Carbide Inserts
Excellent Comprehensive Properties In Strength Hardness Tungsten Carbide Inserts
Unground carbide inserts,tips, brazed onto an all-steel body, stay securely in place ideal for grinding big, clean wood material.We have a special grade of carbide for stump grinder teeth that combines both hardness and toughness. If the stump grinder tip is too tough then it wears out too fast. Our tips last much longer and are the most cost effective.
|Density(g/cm³)||TRS(n/mm²)||HRA||Performance & Applications||ISO Code|
|YT15||11.3||1650||92.0||Higher wear resistance with a certain impact toughness, Suitable for semi-finishing of medium chip sections, or finishing of small chip sections of steel, cast steel, alloy steel.||P10|
|YT14||11.4||1750||91.5||High strength, good impact and shock resistance. Suitable for rough turning, finish milling of carbon steel, and alloy steel during continuous cutting, and semi-finishing and finishing turning during interrupted cutting||P20|
|YT5||12.9||2200||90.5||Best strength, high impact and shock resistance among W-Co-Ti alloys, but comparatively lower wear resistance. Suitable for rough turning, rough planning, and semi-finish planning of carbon steel, and alloy steel including forgings, stamped parts, and cast iron surfaces during intermittent cutting.||P30|
|YW1||13.0||1710||92.5||Better red hardness, resistant to impact load. A good grade for general purposes. Suitable for machining of ordinary steel, cast irons as well as steels hard to be machined such as refractory steel, high manganese steel, and stainless steel, etc.||M10|
|YW2||12.9||1880||91.0||Higher wear resistance and strength, resistant to high impact load. Suitable for roughing and semi-finishing of ordinary steel, and cast irons as well as refractory steel, high manganese steel, and high-grade alloy steel, etc||M20|
|1890||91.5||Fine grain WC alloy, wear resistance higher than YG6, strength close to YG6. Suitable for machining chilled alloy cast irons, and refractory alloy steel, as well as finishing of ordinary cast irons.||K15|
|YG6||14.9||2050||90.5||High wear resistance, better impact and shock resistance. Suitable for semi-finishing, and finishing of cast irons, non-ferrous metal, alloys, and non-metallic materials at moderate cutting speed.||K20|
|YG8||14.7||2520||90.0||High strength, better impact and shock resistance, but lower wear resistance and cutting speed. Suitable for roughing of cast irons, non-ferrous metal, alloys, and non-metallic materials at low speed.||K30|
- High quality and stability
- High performance. dimensionally accurate
- Good abrasive and corrosion resistance
- easy to change out
- Long cutting life time
Chengdu Santon Cemented Carbide Co., Ltd is a professional private company, which consists of producing, selling and developing of nonferrous metal material such as cemented carbide and tungsten and molybdenum products, containing special inserts,brazed tips, cutting tools, also non-standard cemented carbide inserts.
We can manufacture small and large scale carbide products as per your drawing. Our in house technicians and experts are quite qualified in this field with over 20 years of experiences. We are a customer focused, innovative and value driven company which manufactures and supplies cemented carbide products to their valuable customers at affordable price.
Q. Are you a manufacturer or a trading company?
A. We are a professional manufacturer with 10 years of experience of producing and selling carbiede inserts.
Q. What is your main products?
A. Our main products includes cemented carbide plates, strips, blanks, saw tips, geological and mining bits, brazed tips, indexable carbide inserts, wear parts,snow plow inserts, tungsten carbide pins, etc.
Q. what's the payment term?
A. We accept Western union, Onetouch, T/T, and L/C. 30% T/T deposit and 70% balance before shipment, or against copy of BL, or L/C at sight.
Q. What about your delivery time?
A. Usually it will take about 25 - 30 days for production.But for new molds, the lead time may need 10days more to open molds. If you need the goods urgently, we could try to push for and shorten the delivery time.
Q. What is your minimum order quantity(MOQ)?
A. No limit for MOQ. For non-standard products, mold fee need to be paid, but can be refunded later.
Q. What is your warranty?
A. We extend a 100% satisfaction guarantee on all items. if you’re not completely satisfied with our products ,we’ll replace them or refund the fee
Q. Where is your market?
A. Our products are popular in Germany, America, Mexico, India, Russia, Indonesia, Malaysia, Bangladesh, South Africa,etc.